We have a lot of project vehicles pass through our shop, and there’s one common component that many of these cars possess: an Optima battery. As you can imagine, project cars can sit for a while, and the occasional use of the battery without regular charging can sometimes draw a battery down a bit. We’ll test a circuit, start the engine to make sure we have oil pressure, check the timing – and then shut it down for a while. All of these short-term uses can drain a battery without really giving it a chance to charge.
The same can happen to your own project car, and if you’ve ever tried to charge your Optima battery with a regular, lead-acid style battery charger, then you likely know the struggle. Getting an Optima battery to 12 volts isn’t as big a problem as it is keeping it at 12 volts because your conventional charger just doesn’t know how to play nice with an Optima battery.
Charging Problems With A Conventional Charger
We came across this recent struggle with a three-year-old Yellow Top battery that had been sitting in a car, unused, for quite a few months. The purchase date was back in 2013, and our attempts to bring it back to a constant 12 volts with our conventional battery charger ended up in disappointment. Unfortunately, one day after testing some circuits, we inadvertently left the ignition on overnight, and that drained the battery down.
Honestly, we thought there was something wrong with the battery, because when we gave a full charge the battery would eventually drop down to less than 11 volts – every time we charged it. It was frustrating, because three years shouldn’t kill a battery, and despite the fact that we accidentally left the ignition on overnight, it shouldn’t render the battery useless.
So we talked to our friends at Optima Batteries and told them of our dilemma. They had good news for us, and gave us some pointers on charging a drawn-down battery like this with the Optima Digital 1200 Battery Charger. We explained that our store-bought charger was charging the battery, but it would just drop down to a lower voltage after a couple days.
After talking with the folks at Optima, it wasn’t that we weren’t charging the battery, it was that we were not conditioning the battery. “Conditioning?” you ask? You read that right, and no, our conventional charger doesn’t have that option either. It turns out we were merely putting a charge back to the battery but we were not refilling its reserve capacity.
Gel and AGM batteries are often confused for each other but the batteries are very different. -Jim McIlvaine, Optima Batteries
Jim McIlvaine, eCare Manager at Optima said, “Considering all standard charger offerings, in general, we recommend AGM specific settings for our batteries. However, some chargers have an “AGM/gel” setting, which we recommend avoiding.”
“Gel and AGM batteries are often confused for each other, but the batteries are very different and gel-specific settings my not fully charge non-gel batteries, and could damage them over time,” he said.
Why Is Conditioning Important?
So what is conditioning, and why is it so important? We asked Jim, and he said, “Conditioning is the phase where the constant voltage is applied for a specific time frame to desulfate and fully charge the battery for maximum reserve power performance.” He also tells us that the conditioning phase is also done to a standard battery, which not only enhances battery performance, but also battery life.
Conditioning is the phase where the constant voltage is applied for a specific time frame to desulfate and fully charge the battery for maximum reserve power performance. -Jim McIlvaine
We asked Jim why our battery drops the way it does. He explained, “Such a battery might have a defect like an internal short circuit if it is disconnected from a vehicle and just sitting on a workbench. It is normal for all batteries to have a natural self-discharge, but not that fast.”
He explained that while connected to a vehicle, if the voltage drops it could be a parasitic draw that is discharging the battery. “If that is suspected,” he said, “it’s a good idea to remove the battery from the vehicle and fully charge it, and see if it exhibits the same behavior when it’s not connected to anything.” This would give us a true answer, but since our battery was losing voltage while disconnected, we were at a loss for what was causing the battery to drop voltage.
Optima Digital 1200 To The Rescue
Optima sent us its Digital 1200 battery charger, and immediately we noticed that there were some additional choices not found on our standard charger. After connecting our Yellow Top battery and making a couple of selections, the charging process began. It’s a long process, but a simple one: you connect the battery to the charger and walk away to let the Digital 1200 do its job.
Typically, it’s best to let the charger work overnight and give it a good ten hours or so and come back in the morning. You don’t have to worry about overheating, overcharging, or leaving it on the charger too long because the Digital 1200 is a smart-charger.
When it gets warm, the built-in cooling fan kicks on and cools the charger down. We also noticed that unlike conventional chargers that have 2-, 10-, and 50-amp (start) charge functions, the Digital 1200 varied the charging current when it was closer to reaching 12 volts and 100 percent status.
Watching the progress meter, it was much more clear that when it read 75 percent on the indicator dial, the battery condition was at 75 percent. Reading the conventional charger, we never knew exactly what the dials meant because it almost seemed to be reading the opposite.
Once the Optima charger returned our battery back to 12 volts, there was another step only found on the Digital 1200: conditioning the battery. This is the process that brought our Yellow Top back to life, and seeing it with our own eyes – er, our own multimeter – was where the Digital 1200 made a believer out of us.
Once the conditioning was completed, we checked the battery voltage. There will be some residual drop in the voltage until the battery reaches a stable reading, but the real difference was when we gave it a couple days and checked our battery again.
Conditioning The Battery
When using the conventional charger, we found our battery backed down to under 11 volts within a day. But on day two after using the Digital 1200, our battery voltage was at 12.67 volts; day three, four, and five returned the same reading.
Was this a fluke? We wanted to find out, so we put the Digital 1200 on another Optima battery we had in another car – a Blue Top battery. We had an electrical issue that drew that battery down below six volts, which is definitely not enough to start the car.
We put the battery on the Digital 1200 and headed in for the night. In the morning, we checked the battery and it was back up to 12.64 volts when we removed the charger. We reconnected the battery to the car and we tried the same test: we wanted to see what the reading would be the next day or two; much to our surprise, the battery in the car was reading the same voltage as the Yellow Top that was sitting on the the floor.
One battery wouldn’t hold 12 volts, and another was part of an unfortunate electrical issue that drew the battery down to less than six volts. Both were revived with the Digital 1200, and with one sitting on the floor and the other connected to the car, both had the same reading after three days. Even after a month, the Yellow Top battery – despite being used to test motors, lights, and other electrical components – was still at 12.3 volts.
The symptoms were similar to what many of us have experienced, and the initial attempts to charge them were probably what you’ve experienced, as well. But the diagnosis wasn’t bleak, we simply needed a better doctor: the Digital 1200, and now our AGM Optima batteries are both alive again.
If you have an Optima battery in any of your vehicles, this is why you need the Digital 1200 in your garage: because it’s going to be the one tool that fixes your problem the right way, every time. And once your battery is fully charged, you won’t have to get up in the middle of the night to check it and disconnect from the charger.
“After the charging is complete, the charger will enter into its auto maintain mode, keeping your battery fully charged while minimizing sulfation,” Jim told us. “Periodically, the charger will ‘exercise’ the battery by altering the charge profile, further enhancing the useful life of your battery. If there’s a power interruption, the charger will automatically resume charging and maintain your battery when power is restored.” That sort of makes the Optima Digital 1200 a “smart” charger, and it’s a wise choice when making a decision on a battery charger.
Visit the Optima Batteries website and check out the Digital 1200 battery charger, as well as the Digital 400 battery maintainer and charger. Both will keep your Optima batteries in top shape, and the Digital 400 will keep the juices flowing while your project car, bike, or boat sits over the long winter season.